May 29, 2019
Fixed
There was a migration issue in the previous versions when the CIN service was enabled.
May 29, 2019
Improved
Updated internal components.
Known Issue
There is a migration issue when the CIN service is enabled.
May 22, 2019
Fixed
The treatment for service_enabled was allowing a string value instead of just a boolean value.
Known Issue
There is a migration issue when the CIN service is enabled.
May 20, 2019
Improved
Updated internal components to add database health checking on screen call.
March 26, 2019
Fixed
A Termination_Attempt with a missing calling number always resulted in a Disconnect.
March 26, 2019
Fixed
There was an issue with how CIN retrieved treatments after a redirect from IN to SIP.
The functionality to delete numbers was not available.
March 25, 2019
Fixed
There was an issue with SDP exchanging after re-INVITE during B2BUA.
March 22, 2019
Improved
General improvements to call screening performance.
Updated internal components.
Fixed
Not all data associated with a number was deleted from the database when the number was deleted.
CIN incorrectly allowed calls with no calling party information.
November 7, 2018
Improved
Added “then press #” message to the IVR prompt asking for number for clearer user instruction.
Extended the timeout when entering a number using the IVR to allow for more time to enter digits.
Fixed
The Setting tabs was incorrectly shown in the web UI menu when signed in with a Subscriber account.
October 16, 2018
Fixed
There was an issue with SDP negotiation during re-INVITE during B2BUA.
October 5, 2018
Fixed
The call flow sequence was incorrect for re-INVITE during B2BUA.
October 2, 2018
Fixed
When using the IVR and a dialed number or PIN was not the correct length, the incorrect error message was played.
October 1, 2018
Improved
Added “then press #” message to the IVR prompt asking asking for the PIN during authorization for clearer user instruction.
September 28, 2018
New
Added a new CDR for when a call is completed.
Fixed
Override calls did not properly mask anonymous numbers.
Override calls were not prevented from being redirected back through CIN.
September 20, 2018
Fixed
There was a duplicated Call-ID header that caused the B2BUA call to fail when using the Override PIN.
September 20, 2018
Improved
Updated internal components.
Improved functionality on the autofill field when adding a number.
Increased time to enter a PIN in when using the IVR.
Fixed
Sometimes, an IVR session would briefly persist after the call had ended.
There was an issue with the role_update database function.
August 8, 2018
Improved
Extended the length of ringing after recorded greeting when contacting called party.
July 20, 2018
Improved
Updated internal components.
Fixed
The Reject with Media setting was not behaving as expected.
July 2, 2018
Improved
General improvements to REFER signaling in the IVR.
June 14, 2018
Improved
Updated internal components.
Fixed
When using the IVR, a REFER to customer service incorrectly used Replaces.
June 13, 2018
Improved
Removed unnecessary option for Voicemail Service.
Added option for ringing to play on A leg while B leg is being contacted.
Added option to contact customer service before authorization when using the IVR.
Added support for handling re-INVITEs during a B2BUA.
Fixed
When using the IVR, dialing 0 did not redirect to a customer service representative as it should have.
When using the IVR, being redirected to a customer service representative used B2BUA instead of REFER.
May 24, 2018
Improved
CDRs can now be viewed when signed in with a Service Provider or Subscriber account.
Fixed
CDRs did not use the correct ID during a call.
May 23, 2018
Fixed
Numbers in VIP or blocked lists could not be deleted.
May 22, 2018
New
There is a new Customer Service Location setting that can be provisioned by a platform owner.
Improved
When using the IVR, there is now an option to be redirected to a customer service representative instead of returning to the Main Menu.
When using the IVR, dialing 0 in any menu will automatically redirect to a customer service representative.
CIN can now detect when an anonymous termination attempt trigger was caused by a call originating from CIN.
Fixed
Outbound calls from CIN used the Call-ID from the calling invite.
May 3, 2018
Fixed
An outbound call that was IN originating and then redirected to SIP did not correctly use the called number.
April 27, 2018
Improved
Updated internal components.
Fixed
SDP sent in initial re-INVITE.
Anonymous numbers did not retain anonymity in contacting called party.
April 10, 2018
Fixed
Fresh installations were not successful.
April 10, 2018
Improved
General improvements to anonymous call detection.
February 22, 2018
Improved
The Reject with Media setting now works for IN calls.
The Override PIN now works for IN calls.
February 21, 2018
Improved
Updated internal components.
Fixed
Numbers that were not provisioned were screened instead of being connected to the called party.
Dialing the configured Override PIN did not properly bypass screening.
When CIN connected the calling party to the called party as a B2BUA, it did not use the calling party’s Call-ID in the SIP header of the called party dialog.
February 16, 2018
Fixed
IN calls that got a forward_call to redirect to SIP were not sent the correct parameters.
February 14, 2018
Improved
General improvements of the display of CDRs in the web UI.
Fixed
Numbers that were archived and then restored were not screened correctly.
February 8, 2018
Fixed
SIP Calls were inaccurately labeled as anonymous.
February 8, 2018
Improved
When using the IVR, the timeout when listing VIP and blocked numbers was reduced and the prompt saying to press * to return to previous menu was removed to reduce confusion.
February 8, 2018
Fixed
There were incorrect menu items shown when signed in to a Subscriber account.
There were issues with adding and editing numbers.
Subscribers were not archived/restored/purged correctly.
February 7, 2018
New
There are new Specify Treatment settings for anonymous and unmatched calls.
Improved
Updated internal components.
December 21, 2017
Improved
Set NATURE_OF_NUMBER to NATIONAL_NUMBER (3) in the Forward_Call scenario.